DTW Dual Track Vehicle Weighing Series
Standard Features
- Precise and versatile platforms, suitable for all kinds of applications; ideal for modern industries, farms, work yards, landfills, ports, etc, in which one can save space or change the logistical stations
- Extremely compact: only 22 cm high. Takes up little space if installed on the street surface, reduced masonry if installed flush floor to the road surface
- The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe (version for higher loads is available upon request)
- Sturdy loading surface in striated sheet steel
- Sandblasting and varnishing with bi-component epoxy coating, highly resistant to corrosion
- Installable above, as well as flush floor to the street surface
- Reinforced on and off ramps, for mobile or fixed installation (optional)
- Weight detection system through oscillating load bars (patented system) with integrated brake / acceleration compensating limits and anti-slip rubber resting plates
- Load cells protected from dust and water
- Fitted with approval, carried out in factory (to be combined with Dini Argeo indicator)
- Dust and waterproof wirings and connections, easy to connect and disconnect
- Modularity: by adding or removing pairs of modules, the weighbridges can have these lengths: 4,5 m - 9 m - 13,5 m - 18 m - 22,5 (up to 36m by price estimate)
- Wide range of connectable weight indicators, also functioning with rechargeable battery, which allow to use the weighbridge also without an electrical power supply
- 30m long connection cable between DTW and indicators
- Spray paint can RAL 3009 of 400ml included as standard, for post-installation finishing.
- To facilitate maintenance and avoid prolonged immersion of the junction box, the use of the STCAB street cabinet is recommended.
Options and Accessories:
- Available upon request with special capacities and divisions.
- Transport (upon price estimate).
- Kit of on/off mobile ramps.
- Angles of crest kit for flush floor installation or for concrete on/off ramps.
- Dual range CE-M 3000 + 3000e approved (upon price estimate).
Innovative vehicle weighing dual track weighbridge, easily transportable and installable thanks to the reduced height and weight. Designed and built with vey high quality materials, this represents the most efficient solution for saving time, space, and money in comparison to the classic weighbridges currently available on the market. The standard version is fitted with CE-M 3000e APPROVAL, for legal for trade use.
Available versions
| Code | l x w x h (m) |
Max (kg) |
 (kg) |
2R (kg) |
Notes |
|---|---|---|---|---|---|
| DTW515A-9 | 2x (4,50x1,00x0,22) | 15000 | 5 | -- | 2 bridges - 4 weighing bars |
| DTW530A-9 | 2x (4,50x1,00x0,22) | 30000 | 10 | 5/10(**) | 2 bridges - 4 weighing bars |
| DTW930A-9 | 2x (9,00x1,00x0,22) | 30000 | 10 | 5/10(**) | 4 bridges - 6 weighing bars |
| DTW960A-9 | 2x (9,00x1,00x0,22) | 60000 | 20 | 10/20(**) | 4 bridges - 6 weighing bars |
| DTW1430A-9 | 2x (13,50x1,00x0,22) | 30000 | 10 | 5/10(**) | 6 bridges - 8 weighing bars |
| DTW1460A-9 | 2x (13,50x1,00x0,22) | 60000 | 20 | 10/20(**) | 6 bridges - 8 weighing bars |
| DTW1860A-9 | 2x (18,00x1,00x0,22) | 60000 | 20 | 10/20(**) | 8 bridges - 10 weighing bars |
| DTW1880A-9 | 2x (18,00x1,00x0,22) | 80000 | 50 | 20/50(**) | 8 bridges - 10 weighing bars |
| DTW2280A-9 | 2x (22,50x1,00x0,22) | 80000 | 50 | 20/50(**) | 10 bridges - 12 weighing bars |
(*)NET PRICES: please contact the sales department for further information.
WARNING: the product requires special transport, with quote.
(**) Fitted with CE-M 3000e approval. The dual range CE-M 3000 + 3000e approval is optional, upon price estimated.
Parts
| Part # | Description |
|---|---|
| Available versions | |
| DTW515A-9 | Dual track mobile approved weigh bridge with 15000 kg capacity, 5 kg division, striated sheet steel loading surface 4,50x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW530A-9 | Dual track mobile approved weigh bridge with 30000 kg capacity, 10 kg division, striated sheet steel loading surface 4,50x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW930A-9 | Dual track mobile approved weigh bridge with 30000 kg capacity, 10 kg division, striated sheet steel loading surface 9x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW960A-9 | Dual track mobile approved weigh bridge with 60000 kg capacity, 20 kg division, striated sheet steel loading surface 9x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW1430A-9 | Dual track mobile approved weigh bridge with 30000 kg capacity, 10 kg division, striated sheet steel loading surface 13,50x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW1460A-9 | Dual track mobile approved weigh bridge with 60000 kg capacity, 20 kg division, striated sheet steel loading surface 13,50x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW1860A-9 | Dual track mobile approved weigh bridge with 60000 kg capacity, 20 kg division, striated sheet steel loading surface 18x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW1880A-9 | Dual track mobile approved weigh bridge with 80000 kg capacity, 50 kg division, striated sheet steel loading surface 18x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
| DTW2280A-9 | Dual track mobile approved weigh bridge with 80000 kg capacity, 50 kg division, striated sheet steel loading surface 22,5x1 m, h= 0,22 m, painted steel structure. The load capacity complies with the 96/53/EC Directive which defines the maximum axle load for the vehicles transiting in Europe. NET PRICE |
Options
| Part # | Description |
|---|---|
| Transport and installation | |
| WBTRASP1 | Weighing system transport costs. Ask for price estimate. |
| Calibration service with Dini Argeo indicator (only at time of order) | |
| CD4 | ISO 9001 DINI ARGEO calibration report, from 6001 to 15000kg, for single scale/platform. ACCREDIA reference weights. |
| CD5 | ISO 9001 DINI ARGEO calibration report, from 15001 a 60000kg, for single scale/platform. For WBSA, DTW and RWS. ACCREDIA reference weights. |
| Accessories for post-installation finishing | |
| RAL3009 | Spray paint can RAL 3009, of 400ml, for DTW and RWS post-installation finishing. |
| Protection for junction box/electronic circuits | |
| STCAB | Fiberglass street cabinet for housing the junction box. Complete with floor fixing plate. Dimensions: 714 x 1115 x 308 mm. |
| Kit for installing above the street surface | |
| IC190R-1 | 4 painted steel ramps. For DTW with max. capacity 80t. Suitable for use directly on the road surface in mobile or fixed applications. Ramp dimensions: 2,05 x 1 x 0,22 m. _ NET |
| DTWTT | Pair of "T" profiles, l=3m, for concrete ramps. NET _. Realized in galvanized steel, allow the corner protection for installation above ground of the DTW with concrete ramps. |
| Frame for flush floor installation | |
| DTWTC5 | Frame made of 4 lateral and 4 header angles, for 4,5m DTW. NET _. Realized in hot-dip galvanized steel, suitable for flush floor installation of a DTW. |
| DTWTC9 | Frame made of 4 lateral and 4 header angles, for 9m DTW. NET _. Realized in hot-dip galvanized steel, suitable for flush floor installation of a DTW. |
| DTWTC14 | Frame made of 4 lateral and 4 header angles, for 13,5m DTW. NET _. Realized in hot-dip galvanized steel, suitable for flush floor installation of a DTW. |
| DTWTC18 | Frame made of 4 lateral and 4 header angles, for 18m DTW. NET _. Realized in hot-dip galvanized steel, suitable for flush floor installation of a DTW. |
| DTWTC22 | Frame made of 4 lateral and 4 header angles, for 22,5m DTW. NET _. Realized in hot-dip galvanized steel, suitable for flush floor installation of a DTW. |
| Main connectable indicators | |
| 6116EVO-1 | High performance industrial touch screen PC, stainless steel IP67. |
| 3590EGTT | Advanced Touch Screen indicator with 2 IN, 4 OUT, RS485, AF01 software. Tilting version with stainless steel support for bench/wall installation. Fitted with AF01 software as standard. |
| 3590EQ | Indicator with QWERTY keyboard and AF03 software. ABS IP65 case , 59-key keyboard, LED display and graphic LCD display. |
| 3590ET | Touch screen indicator with AF01 software. ABS enclosure. Colour Display. |
| DGT100BC-1 | Weight indicator with 100mm LED display. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure. |
| DFWRPT | Indicator for weighbridges management with attached printer. IP65 ABS case, 17-key keypad, backlit LCD display and real time clock. |
| AF03 | Software for weighbridges, input/output vehicle. For 3590 and CPW weight indicators. |
| AF03GT | Software for weighbridges, vehicle In/Out. For 3590 "TOUCH SCREEN" weight indicators. |
| Weight repeaters | |
| GLR100 | RS485 alphanumeric repeater with 110 mm multicolour LED display. |
| DGT100R-1 | Weight repeater with 100mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure. |
| Printers/Labelers | |
| TM295 | DotMatrix impact printer. Paper / Labels / Tags not included. |
| LX300PRO | DotMatrix impact printer. Paper not included. |
| PR80-1 | Thermal printer with paper cutter. |
| RSCBLX | RS232 cable l=1,5m for LX300, TM295 printers. |