CPX Series Low Profile Compression Load Cell

• Minimum load cell verification interval: Vmin = EMax / 10000
• Full Scale Output: 2mV/V +/- 0,5%
• Non-Repeatability: 0,01% F.S.
• Combined Error 0,05%
• Temperature effect on zero: 0,02% / 10°C
• Temperature effect on full scale output: 0,02% / 10°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -20°C/+60°C
• Creep error after 30 minutes: 0,02% F.S.
• Maximum tolerated excitation voltage: 15 Vdc
• Input Resistance: 750 ± 10 Ohm
• Output Resistance: 700 ± 5 Ohm
• Zero Balance: +/-1% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 120% F.S.
• 4-wire shielded cable, 5 mm diameter:
  - 5 m long for CPX 250...5000 versions;
  - 10 m long for CPX 7500...100000 versions.

• The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
  ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
• The CCATEX certificate is issued after the checks done by qualified technicians, with the help of specific equipments, for each load cell.
• IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.

Code	Max (kg)
CPX250	250
CPX500	500
CPX1000	1000
CPX2500	2500
CPX5000	5000
CPX7500	7500
CPX10000	10000
CPX12500	12500
CPX15000	15000
CPX30000	30000
CPX50000	50000
CPX100000	100000

NOTE: Capacities up to 1000t upon request.