Condec REGulator Series
Standard Features
- Same quality Regulator as used in our Portable Pressure Calibrators
- Low Torque required by operator for pressure adjustment
- Single Stage, Venting Type with spring controlled piston
- Integral inlet filter used to promote long life when used in clean systems
- Adjustable Panel Mounting, see diagram on next page for dimensional requirements
- May be integrated with one of our Burst Discs and/or Pressure Relief Valves for FAIL SAFE operator safety when installing in a system. When integrated with one of our CONDEC patented fingertip-adjustable Orion Series or MPV Needle Valves, you will have the advantages of proper regulation of your source, as well as precise finger-tip adjustment of your downstream system output
Condec's REGulator Series may be integrated with one of our burst discs and/or pressure relief valves for fail safe operator safety when installing in a system. When integrated with one of our CONDEC patented fingertip-adjustable Orion Series or MPV needle valves, you will have the advantages of proper regulation of your source, as well as precise fingertip adjustment of your downstream system output.
Condec REGulator Series Specifications
Data: Materials: |
Dimensions: Height: Approximately 7-1/2 inches (190 mm) when fully opened Body Diameter: 2 inches (50.8 mm) Port Dimensions From Bottom of Base: 13/32 in. (10.3 mm) Panel Mount Adjustment (from bottom of regulator base to rear surface of panel): 3 to 4 inches (76.2 mm to 101.6 mm) |
Condec REGulator Series Dimensions
Parts
Part # | Description |
---|---|
115811 | Regulator, REG 500 Pressure Rating 3000 PSIG/206.9 Bar Input 500 PSIG/34.5 Bar Output 2 Inlet Ports - 1/4-18 NPT, 2 Outlet Ports - 1/4-18 NPT Panel Mount Adjustment (from bottom of regulator base to rear surface of panel) 3in to 4in (76.2mm to 101.6mm) |
106061 | Regulator, REG 1000 Press Rating 3000 PSIG/206.9 Bar Input, 1000 PSIG/68.96 Bar Output 2 Inlet Ports - 1/4-18 NPT, 2 Outlet Ports - 1/4-18 NPT Panel Mount Adjustment (from bottom of regulator base to rear surface of panel) 3in to 4in (76.2mm to 101.6mm) |
106062 | Regulator, REG 2000 Press Rating 3000 PSIG/206.9 Bar Input, 2000 PSIG/137.93 Bar Output 2 Inlet Ports - 1/4-18 NPT, 2 Outlet Ports - 1/4-18 NPT Panel Mount Adjustment (from bottom of regulator base to rear surface of panel) 3in to 4in (76.2mm to 101.6mm) |
104793 | Regulator, REG 3000 Press Rating 3000 PSIG/206.9 Bar Input, 3000 PSIG/206.9 Bar Output 2 Inlet Ports - 1/4-18 NPT, 2 Outlet Ports - 1/4-18 NPT Panel Mount Adjustment (from bottom of regulator base to rear surface of panel) 3in to 4in (76.2mm to 101.6mm) |
An ISO 9001 Registered Company ©2024 Rice Lake Weighing Systems