LaserLT-60 and LaserLT-100 Large-Display Weight Indicators

As of: Tuesday, December 3, 2024

Save or Print to PDF

Standard Features

LED Display
Integrated five-key waterproof keypad
Includes removable back wall mount bracket
Up to four independent scales or four load cell inputs
Quick menu for real and theoretical calibration
Up to three calibration linearization points
Semi-automatic and presettable tare
Two digital outputs for 13 setpoint types with timers to enable on and delay period
Two digital inputs for operating keys remotely

Approvals

WARNING: Cancer and Reproductive Harm California Proposition 65

Large-display Digital Weight Indicator

Use the LaserLT-60 and LaserLT-100 to clearly display weight information at distances up to 150 feet. The displays are ideal for applications where weight needs to be viewed from a distance. Both models operate with a range of weight indicators to easily integrate with any system. The incoming format can be interfaced through a set function or with a manual setup.

Indicators are NTEP Certified when loaded with SCT-1100 firmware. LaserLT-60/100 are configurable weight indicators.

Max 10,000 divisions or multi-range
A/D 24 bit 4-channel conversion
Connect 4 cells with summing or up to 4 independent weighing systems

The LaserLT-60 and LaserLT-100 are designed for indoor, outdoor and washdown applications. With adjustable brightness, the six-digit, seven-segment character LED displays are easy to read even in direct sunlight. The stainless steel enclosure is weathertight with an IP68 rating. With a standard anti-condensation air valve regulating humidity and pressure, these displays are protected for outdoor use.

The LaserLT-60 and LaserLT-100 are easy to mount with standard back brackets or optional side-mounting brackets. The back brackets have a 15-degree angle for clear visibility from below and side-mounting brackets can be used to support, hang or wall mount the remote display.

LaserLT-60 and LaserLT-100 Specifications

Power:
AC voltages: 100 to 240 VAC
DC voltages: 12 to 24 VDC

Excitation Voltage:
5 VDC, 120 mA, 16 × 350 ohm

Analog Signal Input Range:
± 39 mV

Analog Signal Sensitivity:
0.03 μV/graduation minimum
0.3 μV/graduation recommended

A/D Sample Rate:
Four channel A/D up to 200 Conv./sec. auto select

Resolution:
Internal: 1,500,000 counts
Display: 800,000

Digital I/O:
Two inputs: 12/24 VDC
Two outputs: 150 mA 48 VAC/150 mA 60 VDC

Communication Ports:
(1) RS-232, (1) RS-485

Display:
6-digit, 7-segment discrete
red LED lamps, single width
2.4 in (60 mm) or 4 in (100 mm) digit
Decimal/comma indication in any position
Annunciators for NT, Stability, COZ
5 levels of intensity

Maximum Viewing Distance:
LaserLT-60: 2.4 in digit 75 ft (25 m)
LaserLT-100: 4 in digit 100 ft (30 m)

Keys/Buttons:
Five key, Zero (Down), Tare (Up),
Mode (Right), Print (Enter), C (On/Off)

Temperature:
-40° F to 120° F (-40° C to 49° C)

Rating/Material:
304 stainless steel, IP68

Weight:
10 lb (4.5 kg)

Warranty:
One-year limited

Approvals:
NTEP CC 20-046 III/IIIL 10,000d
Measurement Canada AM-6165C III/IIIL 10,000d
CE Marked

LaserLT-60 and LaserLT-100 Dimensions

LaserLT-60
A	16.14 in (410 mm)	D	7.28 in (185 mm)
B	6.50 in (165 mm)	E	2.64 in (67 mm)
C	3.03 in (77 mm)	F	4.84 in (123 mm)

LaserLT-100
A	16.93 in (430 mm)	D	7.63 in (194 mm)
B	7.28 in (185 mm)	E	2.52 in (64 mm)
C	2.52 in (64 mm)	F	3.98 in (101 mm)

Parts

Part #	Description

197453	Indicator,LaserLT-60 Large-Display 60mm (2.4in) LED,12-24VDC/110-240VAC, SST Enclosure
197454	Indicator,LaserLT-100 Large-Display, Red 100mm(4in)LED, 12-24VDC/110-240VAC, SST Encl

Options

Part #	Description

185256	Opt Kit,Tilting Brackets Side Mounting Bracket, 2 SST Angled Bracket for LaserLT-100
185258	Visor,LaserLT-100 Display SST Visor