UPC5100/UPC5110 Pressure Vacuum Calibration Standard
![](/assets/images/discontinued-shade.png)
![](/assets/images/discontinued-logo.png)
![Portals 0 Products 568823Ebddd64228ba92c3decaa76a08 Orig](/media/iwjfqkql/_portals_0_products_568823ebddd64228ba92c3decaa76a08-orig.png?mode=max&width=500&rnd=132538128159200000)
Standard Features
- Available in self-contained enclosure with carrying handles (UPC5100)
- Five independent selectable ranges in each instrument ±0-28 inHg, ±0-387 inH2O, 0-2771 inH2O, ±0-96 kPa, 0-100 psi
- Available with Light Emitting Diode (LED) or Liquid Crystal Display (LCD)
- Pressure/vacuum display resolution 0.02% F.S. typical for each range
- ±0.05% F.S. accuracy for each range
- State-of-the-art push button calibration—no analog potentiometers or adjustments required
- Different technicians can calibrate the same Device-Under-Test and get identical results
- Easy to operate, training can be accomplished in 10 minutes
- Lightweight - less than 35 pounds
- Adjustable overpressure protection
- Precision vernier control
- Self-contained nitrogen cylinder and vacuum converter provides 27 inHg (w/out external pump) to 100 psi
- Voltage/current display mode for transducer testing
- Quick-disconnect fitting and hose included
- Pneumatic only; no hydraulic fluid or distilled water messes
- Calibration certificate included; traceable to the National Institute of Standards and Technology (NIST)
Applications
- Aircraft manufacturing, government laboratories, oil industry, electric power plants (nuclear and fossil), and general industry
- Pharmaceutical validation and calibration
- Bio-medical quality assurance
- Condenser vacuum
Designed for quick, convenient and accurate performance, the UPC5100 pressure vacuum calibration standard takes portability to a new level.
By incorporating self-contained pressure and vacuum sources, the UPC5100 digital pressure vacuum calibration standard eliminates the hassle and mess of hauling around extra hoses and pumps. Everything required for immediate operation is right at your fingertips. Weighing less than 35 pounds, the UPC5100 pressure vacuum calibration standard is easily transported for on-the-go operation.
Each UPC5100 pressure vacuum calibration standard is equipped with five switch-selectable measurement ranges for vacuum and low-pressure applications from 27 inches Hg vacuum to 100 psi. The patented precision Orion 2D vernier control allows the operator to rapidly secure the most accurate pressure value possible. Increased protection is provided by a self-relieving regulator that eliminates costly repairs due to inadvertent pressure overshooting. The UPC5100 pressure vacuum calibration standard is easy to operate and training can be accomplished in as little as 10 minutes. Different technicians can calibrate the same transmitter and get identical results...every time.
From aerospace, to health care, to general industry, the portable UPC5100 or 19 inch rack-mount UPC5110 provides everything you need for fast, accurate digital calibration regardless of where the job takes you.
Condec UPC5100/UPC5110 Model Numbering Guide
Condec UPC5100/UPC5110 Specifications
Available Calibration Modes: Overall accuracy: Temperature Range: Pressure Media: Pressure Media Filter: Control Valves: |
Internal piping: Test Port: Pressure Hose: Vernier Control: Pressure Limit Monitor Gauge: |
Internal Pressure Sensor: UPC5100 External Carrying Case: Current Display: Vacuum Converter: Weight: |
Parts
Part # | Description |
---|---|
Options
Part # | Description |
---|---|
58487 | Pressure Trap,UPC5100 All Ranges, UPS3110 Ranges 15 to 100 PSI, DLR3110 Ranges 3 to 100 PSI Operation - Note: For Replacment Bowl O-Ring order PN 161833 |
55354 | Battery Kit,Rechargeable UPC5000 UPC5100, 12V, 2.9 Amp, Rechargeable Sealed Lead Acid Battery Approved for transport by Air. D.O.T., I.A.T., F.A.A and C.A.B. certified. |
55291 | Fitting,Test Port Quick Disconnect Fitting Male Coupling Body to Finger Tighten 1/4 NPT Female SST for UPC5100 UPC5110 UVC1000 UVC1010, Used as Non Permanent Connection Finger Tighten to DUT, no tools required |
60195 | Fitting,Test Port Quick Disconnect Hose Fitting Male Coupling Body to 1/4 NPT Female Brass for UPC5100 UPC5110 UVC1000 UVC1010 UPS3110 15-100 PSI DLR3110 3-100 PSI |
63257 | LIT,Manual UPC5100 Operating |
55281 | Hose Kit,Test Port Output UPC5100 5 Foot Long hose, 2500 psig working pressure, with Quick Disconnect Brass Plug on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling On Opposite End |
55328 | Hose Kit,Test Port Output UPC5100 10 Foot Long with Quick Disconnect Brass Plug on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
55336 | Hose Kit,Test Port Output UPC5100 15 Foot Long with Quick Disconnect Brass Plug on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
55341 | Hose Kit,Test Port Output UPC5100 20 Foot Long with Quick Disconnect Brass Plug on One End abd 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
57716 | Fitting,Fill Port Quick Disconnect Hose Fitting Female Coupling Body to 1/4 NPT Female Brass for UPC5000 UPC5010 UPC5100 UPC5110 |
55282 | Hose Kit,Fill Port Input UPC5000 UPC5100 DPC1000 DPC2000 5 Foot Long hose, 2500 psig working pressure, fitted with Quick Disconnect Brass Socket on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
55313 | Hose Kit,Fill Port Input UPC5000 UPC5100 DPC1000 DPC2000 10 Foot Long 2500 PSIG Working Pressure with Quick Disconnect Brass Socket on One End and 1/4 Inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
55319 | Hose Kit,Fill Port Input UPC5000 UPC5100 DPC1000 DPC2000 15 Foot Long with Quick Disconnect Brass Socket on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
55322 | Hose Kit,Fill Port Input UPC5000 UPC5100 DPC1000 DPC2000 20 Foot Long with Quick Disconnect Brass Socket on One End and 1/4 inch 37 Degree Female AN Swivel Tube Coupling on Opposite End |
60109 | CONDEC Calibration Module For UPC5000 UPC5010 UPC5100 UPC5110 UPC5200 UPC5210 |
167474 | Fitting, Quick-Disconnect Test Port adjustable adapter assembly, Female Quick-Disconnect to Male Coupling Body other end, 100 PSI, Temp Range 0 Deg F to 200 Deg F, for use between UPC5100 models Test Port and CONDEC Pressure Trap 58487 to allow Trap input/output to be parallel with UPC5100 front panel), No installation tools required |
An ISO 9001 Registered Company ©2023 Rice Lake Weighing Systems