DGT20I: IP68 Stainless Steel Weight Transmitter/Indicator

As of: Thursday, November 21, 2024

Save or Print to PDF

Standard Features

Easy to use 5-key waterproof keyboard.
Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
New AISI304 stainless steel multifunction protective case, which allows:- Wall or bench installation via standard swivel bracket
- Panel installation with IP68 degree of protection both front and rear, ideal for the chemical, pharmaceutical and food industry and harsh environments.
- Easy cabling, inspection and maintenance with front panel removal system.
IP68 degree of protection, with both bench and panel installation.
Dimensions 212x169,5x91mm, fitted with support bracket for table or wall mounting.
Theoretical calibration.
Up to 8 signal linearization points with DINITOOLS (3 from keypad).
Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
Up to 10.000e OIML or 2 x 3000e @ 0,3 µV/e CE-M legal for trade.
Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
A/D 24-bit sigma-delta conversion, up to 400 conv./sec. autoselect.
Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
DGT20I / DGT20IAN:Power supply from 12Vdc to 24Vdc. With external power unit 110/230Vac - 12Vdc and IP68 connector. EU, UK, US plugs included as standard.
DGT20IPW: Internal power unit 110/230Vac.

Approvals

Australian National Measurement Institute

Weight indicator/transmitter with AISI 304 stainless steel multifunction case that guarantees an IP68 degree of protection both on bench and panel installations. Suitable for heavy industrial applications, for dosage, filling and level control systems.

Specifications

FUNCTIONS:

Keyboards
Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.

Selectable
High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak.

External Input
Simulation of key pressure; Keyboard lock.

Mosfet Output
Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.

Serial Ports:

On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds.
DGT20I and DGT20IAN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.

16 but Analogue Output (DGT20IAN)
Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

I/O SECTION:

RS232/C bidirectional port (RJ11 connector) configurable for connection to external units.
RS485 bidirectional port configurable for network connection.
2 photomosphet outputs 150 mA 48 Vac/150 mA 60 Vdc (NO) with configurable functions.
2 inputs (optoisolator photocouplers) 12 ÷ 24 Vdc, 5 mA min - 20 mA max, with configurable functions.
16-bit analogue output (DGT20IAN model) 4-20mA, 0-5Vdc choice or 0-10 Vdc. Maximum load applicable to the current output: 300 Ohm. Minimum load applicable to live output: 1K Ohm.

MASTER/REPEATER OPTION (MSTSLV code):
Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

Functioning Modes:
Multi-scale repeater (MASTER)
function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.

UNIVERSAL weight repeater
function which allows to repeat the weight of any scales, through the configuration of the input string.

CERTIFICATIONS:
CE-M EN 45501
OIML R76
OIML R61 - MID
OIML R51 - MID
Australian legal for trade certificate of approval (NMI S788)

Parts

Part #	Description
Available Versions
DGT20I-1	Indicator for table/panel mounting with 2 IN and 2 OUT. Stainless steel case, 5-key keypad, LED display, and standard weighing programme. With external power unit 110/230Vac - 12Vdc and IP68 connector.
DGT20IPW	Indicator for table/panel mounting with 2 IN and 2 OUT. Stainless steel case, 5-key keypad, LED display, and standard weighing programme. With internal power unit 110/220Vac.
DGT20IAN-1	Indicator for table/panel mounting with 2 IN, 2 OUT, analogue output. Stainless steel case, 5-key keypad, LED display, and standard weighing programme. With external power unit 110/230Vac - 12Vdc and IP68 connector.

Options

Part #	Description
RS485 lightning and surge protection
RS485PDIN	Protection circuit for port 485, with enclosure for DIN rail installation. Protection according to IEC 1000-4-5/D (IEC 801-5/D).
Optional power supply cords
PWCORDUK	Power supply cord with BS1363 plug (UK plug).
PWCORDCH	Power supply cord with SEV1011 plug (CH plug).
PWCORDUS	Version with US type B power cord (Japan, North and Central America).
PWCORDAUS	Version with AU power cord.
Columns, supports brackets, visors
DGT20ISTF	Kit for panel installation.
CSP38I-1	AISI 304 stainless steel column 450x450mm, h=917mm, O 38mm. For the indicators of the DINI ARGEO and SCALE HOUSE range.
CSP38	Stainless steel column 450x450mm, h=917, O 38mm. Painted steel base. For the indicators of the DINI ARGEO and SCALE HOUSE range.
Approval for sale to third parties
KCEM	Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination with a Dini Argeo indicator.
ECEM-AU	Single platform/scale legal-for-trade approval for Australia.
Storing the weighs
SWM	"WeiMonitor" PC program to monitor and record in real time weighs performed on the connected scale (the price is intended for the license to manage one scale).
Weight repeater software
MSTSLV	Program for using the indicator as a repeater. It must be combined with the DFW and DGT weight indicators.
Printers/Labelers
OBTPRB	Table thermal printer. For weight indicator, with IP40 ABS case, 1,5 m connection cable and internal power supply. Thermal paper roll included as standard.
TPRP	Panel thermal printer. Fitted with connection cable, 5Vdc power supply (power adapter not included).
TPRPCAL	5Vdc power supply unit.
Communication Interfaces
ALMEM-1	Alibi memory (fiscal memory, max 120.000 weighs) for approved weight transmission to PC/PLC or data recording on MMC/USB. Built-in real time clock to print the date/time with PCB, screw terminal, plastic box and UL-marked labels (if applicable).
SETHDIN-1	RS232 / RS485 / Ethernet converter. Modbus RTU / Modbus TCP/IP (if applicable). Connectable to all Dini Argeo weight indicators via the serial port. ABS housing for DIN rail. With PCB, screw terminals, plastic box and UL marked labels (if applicable).
RSCBUSB485	USB cable converter PC/RS485, l=1,5m. With metallic PG9 cable gland. To be combined with an indicator fitted with optional or standard RS485 output.
Date&Time option
DFCLK	Real time clock for printing/displaying of date and time. With UL marked PCB, screw terminal, plastic box and labels (if applicable).
Connection cables
RSCBUSB-1	USB PC/RS232 converter cable, l=1,5m. USB/RJ11 connector.
Options for ATEX version
ZBA1S	Intrinsic protection three channel Zener barrier. Specific for connection to load cells, for mounting on DIN rail in a safe area, or in a flame-proof case. Marking: ATEX/IECEx II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC. Manual and ATEX UE CONFORMITY DECLARATIONS (available in EN, DE, FR, ES and IT).
KZBA-1	ATEX ABS housing kit with Zener Barrier ZBA1S for load cells. For intrinsically safe weighing systems in a dangerous zone. Dimensions 179x359x166,5mm. It can connect up to 8 350 Ohm load cells. Marking of housing + Zener Barrier ZBA1S: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc X for gas, ATEX II 3(1)D Ex tc [ia Da] IIIC T135øC Dc IP66 X for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
KMB4-1	Kit of 3 ATEX Zener barriers for load cells, in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in a dangerous area. Marking of the whole box with three Zener barriers: ATEX II 3(1)G Ex nA [ia Ga] IIC T4 Gc (-20øC = Ta = +40øC) for gas, ATEX II 3(1)D Ex tb [ia Da] IIIC T130øC Dc IP65 (-20øC = Ta = +40øC) for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN and IT).
DCATEXMB4	ATEX declaration for the whole system with Dini Argeo Zener barriers. Ex II 2G IIC T6 Gb X e Ex II 2D IIIC T125øC Db X system, with label of the whole system, for weight indicator connected to Dini Argeo zener barriers, connected to a mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). Provided with descriptive document of the assembly and ATEX EU declaration of conformity of the assembly (EN and IT).
JB4QA	ATEX equalisation box made of ABS IP67, for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115øC Db IP65 for dust. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
JB4QAI	ATEX equalisation box made of stainless steel IP66 for up to 4 cells. 4 + 1 fairleads. Marking: ATEX II 2G Ex ib IIC T6 Gb for gases, ATEX II 2D Ex tb IIIC T115øC Db IP65 for dusts. Provided with safety instructions and the ATEX EU declaration of conformity (EN, DE, FR, ES and IT).
EXCB6	Blue shielded cable 6x0.22 mmý, only for EX i (2GD) assemblies. PVC inner sheath. Tinned copper braid shielding. Polyurethane outer sheath, diameter 5.8 mm. Temperature range: -40 / +80 øC. Minimum bending radius >/= 7 x O.D. _/m
Other accessories / options
TECSUP	Technical assistance by telephone upon request.
TECMAN	Printed technical manual (Free download from the website).
UMAN	Printed user manual (Free download from the website).
ECEMDOC	Printed EU declaration of conformity, EU certificate of verification, test certificate and metrological book (free download from our website, only for approved CE-M products). NET _.