DGT100 Maxi Weight Indicator/Universal Repeater

I/O Section:
RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
PROFIBUS serial interface (DGT100PB model).
2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions.
16-bit analogue output (DGT100AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 300 Ohm; minimum applicable voltage resistance: 1 kohm.

DGT100BC/DGT100AN/DGT100PB Functions:
THROUGH KEYBOARD - Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
PROGRAM FUNCTIONS - Setpoint, high resolution, peak, alibi memory, unit of measure conversion.
EXTERNAL INPUT - Simulation of key pressure; Keyboard lock.
MOSFET OUTPUT - Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
SERIAL PORTS - On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
DGT100BC and DGT100AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
THROUGH 16 bit ANALOGUE OUTPUT (DGT100AN) - Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

Main Certifications:
CE-M EN 45501
OIML R76
OIML R61 - MID
OIML R51
Australian legal for trade certificate of approval (NMI S788)

DGT100R Repeater Functions:
Version with specific program for using the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

FUNCTIONING MODES:
Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through the configuration of the input string.